Go Back

Farming Drone Multi-Band GNSS Antenna
This GNSS antenna is mainly used for farming drone , adopts multi-feedpoint technology, supporting satellite navigation signal reception in the L1, L2/L5, and L-band frequency bands of BeiDou Phase II, GPS, GLONASS, and GALILEO systems. It features built-in multi-level filters and low-noise amplifiers with excellent out-of-band suppression and strong anti-interference capabilities, ensuring normal operation in harsh electromagnetic environments. It meets the current demands for multi-system compatibility and high-precision measurements.
Designed for applications with requirements for compact size and lightweight, such as unmanned aerial vehicles (drones) and micro RTK systems, the antenna utilizes multi-arm spiral technology to ensure right-hand circular polarization and phase center performance, reducing the impact of measurement errors. The antenna unit exhibits characteristics of high gain, low gain roll-off, and good reception of low elevation angle satellite signals. It also features a compact design, lightweight construction, and easy portability for convenient installation and carrying.
Designed for applications with requirements for compact size and lightweight, such as unmanned aerial vehicles (drones) and micro RTK systems, the antenna utilizes multi-arm spiral technology to ensure right-hand circular polarization and phase center performance, reducing the impact of measurement errors. The antenna unit exhibits characteristics of high gain, low gain roll-off, and good reception of low elevation angle satellite signals. It also features a compact design, lightweight construction, and easy portability for convenient installation and carrying.
More Details
Teachnical Parameters :
- Antenna name : GNSS farming drone antenna
- Patch Architecture : Ouadrifilar Helix
- GPS : L1 , L2 , L5
- GLONASS : L1 , L2 , L3
- BDS : B1 , B2 , B3
- Galileo : E1 , E5 , E6
- L-band
- Peak Gain : ≥2.5 dBi
- Polarization : RHCP
- Axial Ratio@zenith : ≤1.5dB
- Azimuth Coverage : 360°
- Impedance : 50 ohm
- Frequency Range : 1164MHz~1278MHz , 1525MHz~1615MHz
- LNA Gain : 35+3.0dB (Typ.@25°C)
- Group Delay variation : ≤5ns
- Noise Figure : ≤1.5 dB@25°C , Typ
- Output VSWR : ≤l.8:1 , typ. 2.0:l max
- Operation Voltage : 3.0~6.0V DC , preferred 3.3V or 5.0V
- Operation Current : ≤45mA
- Connector : SMA-J
- Housing Material : ABS+PC
- Weight : 29g
- Installation : screws
- Operating Temperature : 40C~+85'C
Dimension : in mm
